High speed tire burst! What about brake failure? Maybe you can use the self-help method!

Take this high-speed accident self rescue strategy

Even if you are Xiaobai

There's nothing to be afraid of following the old driver

8 tips for auto rescue in case of accident

Make travel more secure

Accidents and tomorrow, you never know which will come first? "

What we can do is to do our best to help ourselves!

How to deal with high-speed tire burst

A flat tire is an unexpected and dangerous condition when driving at high speed. The tire loses most of the air in a very short time (less than 0.1 second), thus affecting normal driving.

Front wheel burst

Be sure to hold the steering wheel tightly, adjust the front of the car, and move gently. Do not hit the steering wheel repeatedly, or press the brake hard. After the vehicle slows down gradually, tap the steering wheel gently, and then erect warning triangle at the back of the car to prevent secondary accidents.

Rear wheel burst

The car will present an unstable state, generating a slight force, which will make the car tend to the side of the flat tire. At this time, the car should be stopped slowly by means of oil collection and downshifting. A flat tire in the rear wheel is not very dangerous. Just hold the steering wheel firmly.

Daily precautions

1. To improve the understanding of tire safety, we need to check more tires at ordinary times, especially before going to high speed.

2. Carry out tire transposition regularly to keep tire wear uniform. Tire transposition shall be carried out every 5000 km and four-wheel positioning shall be carried out every 5000-10000 km to avoid abnormal excessive tire wear.

3. If the wheel balance is corrected regularly, the wheel imbalance will exceed the standard, and the high-frequency swing will occur when driving at high speed, which will cause the tire eccentric wear, which is not conducive to driving safety.

How to repair the leakage of water tank

During driving, water shortage in water tank will cause a series of adverse phenomena such as engine overheating and power reduction. If it's normal driving, we don't need to be alarmed. If there is no condition to repair around the field, water leakage in water tank will be a little tricky. Here we introduce a common emergency treatment method for you to solve the problem.

If there are several small water leaks in the water tank (caused by sand holes in the water tank), you can open the water tank cover after the engine cools down, fold the cigarettes, crush the tobacco and pour it into the water tank, or turn the soap into the size of soybean and pour it into the water tank, then fill up the water, cover the water tank cover and start the engine. Before long, tobacco or soap will block the sand hole in the process of water circulation, which can temporarily solve the problem of water leakage in the water tank. Once conditions permit, it should be repaired immediately, and the cooling system needs to be cleaned.

Daily precautions

1. Check the water tank regularly: the water level in the water tank is a routine item for checking the car every day. Don't neglect this point. The water tank wall should be wiped regularly to avoid being covered by dust and where the water level is.

How to deal with the high water temperature of the engine

There are many reasons for the high water temperature, such as the fan belt fracture, water tank or water pipe leakage, thermostat failure, oil leakage, etc. If the power of the engine disappears or there is a loud knocking or knocking sound during driving, it is mostly because the engine is overheated.

If you find any problem, you should first slow down, and then drive to the roadside. Don't rush to shut down the engine. You should know that if the water temperature is too high, the temperature of the piston, cylinder wall, cylinder, crankshaft, etc. will be too high, and the engine oil will become thinner and lose its lubricating effect. If the engine is turned off at this time, the parts are in the expansion state, and the gap between the parts is very small, some soft metals will fall off after shutdown, and some even cause cylinder sticking. Therefore, when the boiler is opened, do not turn off the engine immediately, but keep idling temporarily and try to cool down.

When cooling down, do not pour cold water on the engine, which may cause the engine block to crack due to sudden cooling and lead to irreparable consequences. The right way is: put on gloves, gently unscrew a small seam on the water tank cover, wait for the water vapor to discharge slowly, and then add cold water or antifreeze after the water tank pressure drops.

How to save yourself from brake failure

After the brake fails, remember not to jerk the handbrake, otherwise it will cause the wire rope of the handbrake to break with excessive force, which will cause the handbrake to fail, or the rear wheel of the vehicle to lock up, and the vehicle will easily lose control.

Hand brake coordinated starting mechanism

If the car in manual gear has brake failure, release the accelerator pedal for the first time. Depress the clutch to downshift for engine traction. Continuous downshift and handbrake can achieve the purpose of deceleration. But when you pull the handbrake, you can't pull it, just a moment later. Otherwise, the rear wheel will lock up, and the vehicle may lose control again.

Now most cars are in automatic gear. Although it is said that automatic transmission has no obvious effect on downshifting of manual transmission. In addition, some transmissions do not have downshift function. Therefore, if downshift is required, downshift shall be carried out in cooperation with the handbrake. When pulling the handbrake, press and hold the release button, and then pull the handbrake continuously. After pulling up, press the electronic handbrake, and slowly stop the car.

Select emergency Lane brake

If the above method is still unable to brake, the vehicle warning light needs to be pulled at this time to avoid injury to innocent vehicles. At the same time, it is also necessary to find some suitable road sections to slow down. It is a good choice to have emergency escape roads or uphill roads.

Use obstacles on the road

In case of brake failure, especially the above methods are not applicable. The car owner can only stop the car from the big trees, large parking lots and even houses near the road as buffer barriers for the car brake. But this is the next step. Maybe the owner is in danger

Will the car be out of service if it is not maintained in the 4s shop?