I was three days ago

For a while I found baffling fuel consumption rises

Own neither violence nor the total driving experience congestion

But also decreases the power car feeling becomes meat

I feel like a fat man with car pulled up

Often need to step on the accelerator to speed

I thought it was the oil issue

Repair shop to repair the said engine deposits

We have to talk about some money saving and reliable carbon prevention, clean-up methods.

Causes of carbon and harm

In operation of the engine, glue residue due to combustion gas produced by incomplete combustion, the formation of coke, adhering to the cylinder head and around the spark plug, affect the normal operation of the cylinder, reducing the performance of the engine.

Preventing carbon deposition

1, do not travel long idle

Do not allow the vehicle to idle for a long time, especially not for a long time idling air conditioning. The water temperature at 85 ~ 90 , the engine will in the best working condition, or incomplete combustion of gasoline, the more soot. From this reason that morning long hot car, the engine temperature rises very slowly, can also cause carbon deposition. Air conditioning running at idle, but also will result in engine load.

2, a multi-speed running, the shift speed increase

Run high-speed air stream may be utilized for airway flushing, flush part carbon. So, if you just go out there are two options to go high-speed, State Road, may wish to select a high speed. But if specifically designed to "wash away soot" specifically to run high-speed, it will not be necessary.

3, high-quality gasoline filling

Gasoline gum and wax impurities such as carbon formation is the main component, so that a high cleanliness tendency to form coke on gasoline weaker. But do not blindly but blindly filling high-grade oil, because the current quality of gasoline also relatively low, does not mean that high-grade quality, in other words high grade oil is not necessarily less than the low grade oil impurities, label represents oil octane, and does not represent the quality and cleanliness.

Clean up carbon method

1, add fuel additive

Gasoline detergents in gasoline is added, can effectively prevent the formation of carbon layer on the metal surface of the junction, and can flow with the fuel, it is not only washed in the tank, the gum and the gum petrol pump nozzle on the screen and coke quality may also be when the engine is working properly, the valve is automatically cleansed and carbon deposits within the engine cylinders.

2, carburetor detergent was added

Operation is relatively simple, remove the decorative cap engine, the throttle valve is removed, and a carburetor cleaner cleaning thereof, can be installed after drying. However, this method is generally more effective for cleaning the valve just coke.

3, the cleaning agent is added inside the engine

After cleaning the entire tank mixing used oil agent, idling ignition flame for 5-10 minutes, to completely drain the used oil, and then replace the filter and can add new oil. Such operation effectively clean internal engine carbon deposits, deposits inside the engine cleaning agent is dissolved sludge, gum, water and metal chips, etc., to extend the life of the engine. The key is to save money, a bottle of cleaner internal engine market price will be about 40, count the new oil can not spend too much money!

I remind: generally about once every 10,000 kilometers above the clean-up is the best soot, this can extend engine life cycle. If a problem is detected and the cylinder valve is caused by too much carbon, it is necessary to disassemble the engine bleeding method to solve, the most important thing for carbon deposition prevention.